收藏本站
CRD35L01
1. SYSTEM OVERVIEW
The CRD35L01 reference design is a practical means for evaluating the CS35L01 high-efficiency Class-D audio am-
plifier with idle current consumption. A differential mono analog input signal interface is provided. Optional input gain
and output filtering component placeholders are provided for easy modification to custom tune the CS35L01 for the
user’s specific system requirements.
1.1
1.2
1.3
CS35L01 Hybrid Class-D Amplifier
The CS35L01 Hybrid Class-D amplifier is a mono, full-bridge, closed-loop, +6-dB gain, audio amplifier avail-
able in a 9-ball, WLCSP package. A complete description of the CS35L01 device is included in the CS35L01
product data sheet.
Power Supply
A single +2.5 to +5.5 VDC power supply is required to power the CRD35L01. The supply must be capable
of delivering sufficient current for the intended power output. The supply provides power to the CS35L01.
The power supply connection to the board is provided by the header J4. The positive terminal is labeled
VBATT. The ground terminal is labeled GND.
Operational Modes
The CS35L01 device has four operational modes, each of which require slightly different hardware connec-
tions. Four boards are available to illustrate the hardware design differences between each of the four
modes. More information on the specifics of each operational mode can be found in the CS35L01/03 prod-
uct datasheet. The CRD names listed below are populated with a CS35L01 device.
?
?
?
?
CRD35L01-SD: Standard Class-D Mode
CRD35L01-FSD: Reduced-Frequency Standard Class-D Mode
CRD35L01-HD: Hybrid Class-D Mode
CRD35L01-FHD: Reduced-Frequency Hybrid Class-D Mode
The CRD35L01-SD schematic is shown in Figure 2 on page 8 . The CRD35L01-FSD schematic is shown in
Figure 3 on page 8 . The CRD35L01-HD schematic is shown in Figure 5 on page 8 . The CRD35L01-FHD
schematic is shown in Figure 5 on page 8 .
1.4
1.5
1.5.1
4
Shutdown Control
The J2 header contains shutdown control for the CS35L01 device. Placing a jumper across the J2 header
pulls the SD line LOW and shuts down the amplifier. When no jumper is present, the SD line is pulled HIGH
by the R3 resistor, enabling normal operation.
Amplifier Gain
The amplifier gain of the CS35L01 device is +6 dB by default. The amplifier gain can be reduced through
the use of the optional input gain adjustment resistors on the CRD35L01.
Optional Input Gain Adjustment Resistors
The CRD35L01 contains optional gain adjustment resistor placeholders (R1 and R2). By default, these
placeholders are not populated and are bypassed with a signal trace configuring the CS35L01 to operate
at its default gain. The gain adjustment resistors are necessary only when a gain of +6 dB is not desired.
DS914RD2
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
CRD42L52 REFERENCE DESIGN FOR CS42L52
CRDSB30WX2 REF BD SPEAKERBAR MSA/DSP PARTS
CS-DF-MJB RF CONN 2.4(IW 1501)STR JACK
CS-DM-MJB RF CONN 2.4(IW 1501)STR PLUG
CS-FF-MJB RF CONN 2.92(K)(IW 1501)STR JACK
CS-FF-MSB RFCON 2.92(K)SEMF HP160 STR JACK
CS-FF-MSR RF CONN 2.92(K) (.085) STR JACK
CS-FFB-MSR RF CONN 2.92(K) (.085) STR BULK
相关代理商/技术参数
CRD4110-1 功能描述:TRNSDCR CRNT RS485 DIG 0-1AAC RoHS:是 类别:传感器，转换器 >> 电流 系列:CRD4100 标准包装:10 系列:*
CRD4110-15 功能描述:TRNSDCR CRNT RS485 DIG 0-15AAC RoHS:是 类别:传感器，转换器 >> 电流 系列:CRD4100 标准包装:10 系列:*
CRD4110-25 功能描述:TRNSDCR CRNT RS485 DIG 0-25AAC RoHS:是 类别:传感器，转换器 >> 电流 系列:CRD4100 标准包装:10 系列:*
CRD4110-5 功能描述:TRNSDCR CRNT RS485 DIG 0-5AAC RoHS:是 类别:传感器，转换器 >> 电流 系列:CRD4100 标准包装:10 系列:*
CRD4150-1 功能描述:TRANSDCR CRNT RS485 DIG 0-1AAC RoHS:是 类别:传感器，转换器 >> 电流 系列:CRD4100 标准包装:10 系列:*
CRD4150-15 功能描述:TRNSDCR CRNT RS485 DIG 0-15AAC RoHS:是 类别:传感器，转换器 >> 电流 系列:CRD4100 标准包装:10 系列:*
CRD4150-25 功能描述:TRANSDCR CRNT RS485 DIG 0-25 AAC RoHS:是 类别:传感器，转换器 >> 电流 系列:CRD4100 标准包装:10 系列:*
CRD4150-5 功能描述:TRANSDCR CRRNT RS485 DIG 0-5 AAC RoHS:是 类别:传感器，转换器 >> 电流 系列:CRD4100 标准包装:10 系列:*